PE Tarpaulin 160gms Organic Coated Trucking Cover – Custom Made

Description

Verified Coating Weight Control — Each roll of 160gms PE tarpaulin undergoes dedicated QA/QC with 100% inspection against stated GSM before dispatch, backed by nearly 30 years of coated fabric process control.

Technical Specifications

Application Suitability

When the Quoted GSM Does Not Match What Arrives

Weight verification must happen before the roll leaves the factory, not after it reaches your warehouse.

A recurring frustration across the PE tarpaulin supply chain is receiving material that measures lighter than the GSM printed on the quotation. With 160gms PE tarpaulin roll stock, a shortfall of even a small percentage in coating weight reduces the LDPE layer thickness, compromising waterproof continuity and reducing abrasion resistance at tie-down points. Distributors and transport fleets that specify by weight expect the roll to meet that weight consistently across the full production run. [NEED_CITE: GSM verification methods for coated polyethylene fabrics per ISO testing standards]

Colour Matching Across a Multi-Roll Order

Consistent colour across an entire container of PE Tarpaulin Roll stock is a production discipline issue, not a material issue. When rolls from the same order are unrolled side by side on a truck bed or across a construction site, even slight hue shifts become visible. The 160gms grade is available in Blue, Orange, White, Black, Grey, Yellow, Green, Red, or custom colours, and batch consistency depends on controlled LDPE compounding and uniform coating temperature across all three production lines. Buyers surveying options before specifying should request a reference sample against which the full run is checked.

Roll Dimensions and Downstream Fabrication Yield

The 100-metre standard roll length, combined with available mesh densities from 6X6 to 16X16, determines how efficiently a fabricator can cut sheets with minimal offcut waste. HDPE woven base fabric with LDPE coating on both sides responds well to heat cutting, producing a sealed edge that resists fraying. When planning sheet sizes — from 2X3 to 12X14 or fully custom dimensions — aligning roll width to the target sheet width reduces the number of welded seams needed. Fewer seams mean fewer potential failure points under load flex, particularly on truck and trailer applications where the cover is repeatedly tensioned and released. [NEED_CITE: heat welding parameters for LDPE coated polyethylene tarpaulin]

How Mesh Density and Weight Together Define Performance

The stated 160gms weight reflects the combined mass of the HDPE woven base fabric and the LDPE coating on both sides, but weight alone does not define mechanical performance. A 160gms material woven at 6X6 mesh uses thicker individual yarns with wider gaps, yielding higher tear resistance in each yarn but potentially lower puncture resistance across the open areas. At 16X16 mesh, the same weight is distributed across more, finer yarns with smaller gaps, producing a tighter surface that better resists dust ingress and offers more uniform support for the LDPE coating layer. Selecting the right density within this range depends on whether the primary threat is tearing from sharp load edges or sustained abrasion from wind-driven contact.

The dual-side LDPE coating method — as opposed to single-side lamination — ensures that both faces carry equal waterproof protection, which matters when a truck cover is flipped or when a construction sheet lies directly on wet ground. The PP rope hem and black plastic triangle corner reinforcements distribute tie-down forces across multiple weave intersections rather than concentrating them at a single eyelet, reducing the chance of the rustproof aluminum eyelet pulling through under load.

What Happens When Colour Varies Between Rolls

Colour mismatch across rolls in the same shipment forces a distributor to sort and repack before resale, or worse, delivers a visibly inconsistent result when a fleet operator installs sheets side by side on adjacent trailers. This problem originates in uncontrolled pigment dosing during LDPE compounding or in temperature variation across the coating die. When sourcing PE tarpaulin in volume, approving a colour reference sample before the full production run begins, and then checking the first and last roll of each batch against that reference, prevents costly rejection after delivery. [NEED_CITE: colour consistency testing methods for pigmented polyethylene coating]

Why Source This PE Tarpaulin From Jinxiang

Deep process control over coating weight and adhesion, developed across nearly 30 years focused on coated fabric, ensures that the 160gms weight you specify is the weight you receive roll after roll.

Three full production lines and 36 sets of professional equipment support bulk roll orders with reliable on-time delivery, maintaining batch consistency whether the order fills a 20GP or a 40HQ container.

A 10-person R&D team handles custom colour matching, pattern printing, and sheet size development, producing samples within days so buyers can verify fit and finish before committing to a full production run.

Dedicated QA/QC at every production stage, with 100% pre-shipment inspection, catches GSM deviation, colour drift, and eyelet placement errors before the rolls are packed.

Full customization in roll length, sheet size, eyelet spacing, and printing — including reinforced strips for high-stress tie-down zones — is available without the long lead times or high minimums that typically restrict custom orders.

Documentation & Verification

• Material specification sheet stating 160gms, HDPE base fabric type, and LDPE coating confirmation
• Pre-shipment inspection record with GSM check and colour reference comparison per roll
• UV and fire resistant test reports supplied where treatment is specified — confirm required standard
• Roll packing list with roll count, net weight, and gross weight per container
• Certificate of origin and customs documentation for export shipments

Fabrication, Handling & Storage

• Heat-cut the 160gms LDPE coated material at appropriate temperature to seal edges and prevent fraying during sheet fabrication
• Position rustproof aluminum eyelets at 1m or 1.5m intervals aligned with PP rope hem for even load distribution
• Store PE tarpaulin rolls upright on pallets to avoid flat-spotting and permanent creases in the HDPE woven base
• Avoid dragging cut sheets across abrasive surfaces to protect the LDPE coating layer on both sides
• Use mild detergent and soft brush for cleaning; solvents may degrade the anti-aging additives in the coating
• Fold finished sheets along original crease lines to prevent stress marks on corner reinforcement areas

Before You Send an Inquiry

To receive an accurate specification and sample for this 160gms PE tarpaulin, share your intended application, the environmental exposure conditions the cover will face, and whether you need roll stock or finished cut sheets. Specify your target colour with a reference code, required eyelet spacing, and whether fire resistant or UV protection treatment is needed along with the test standard your market requires. If custom printing or reinforced strips are part of the design, include artwork or layout files so the R&D team can develop a sample that matches your exact requirements.

Frequently Asked Questions

Q: How is the 160gms weight verified before the PE tarpaulin roll ships?
A: Each roll undergoes 100% pre-shipment inspection where GSM is measured against the stated 160gms specification. Dedicated QA/QC staff check coating weight at multiple points across the roll width, and results are recorded in the pre-shipment inspection report that accompanies your documentation package.

Q: What UV or fire resistant test reports can I get with this PE tarpaulin?
A: Fire resistant and UV protection treatments are available on request. The specific test report provided depends on the grade and standard confirmed for your market — share your local compliance requirement so the appropriate treatment and documentation are matched to your order.

Q: Can I order custom widths, lengths, and colours with this 160gms grade?
A: Custom roll lengths, sheet sizes, and colours are available. A sample is developed within days for approval before full production begins, allowing you to verify colour, weight, and fabrication details. Minimums and lead times are confirmed during quotation based on your specification.

Q: How is colour consistency maintained across a multi-roll container order?
A: Colour is controlled through standardized LDPE pigment compounding and verified against an approved reference sample. The first and last rolls of each production batch are checked before packing, and the pre-shipment inspection record documents the colour comparison results.

Q: What eyelet spacing and reinforcement options are available?
A: Rustproof aluminum eyelets are available at 1m, 1.5m, or custom spacing. All edges include PP rope in the hem, and corners receive black plastic triangle reinforcement. Reinforced strips can be added at high-stress tie-down zones upon request.