PE Tarpaulin with Custom Sizes – Full Range

Description

Process Control Over Coating Weight — every PE tarpaulin roll and sheet undergoes dedicated QA at each production stage, with 100 % pre-shipment verification of GSM against the quoted value before dispatch.

Technical Specifications

Application Suitability

Why GSM Alone Does Not Define PE Tarpaulin Performance

Mesh density and base fabric weave determine real field strength far more than weight per square metre.

Buyers frequently specify a PE Tarpaulin custom order by GSM alone, only to find the material tears at the hem or the eyelets pull through under tie-down load. A 150 g/m² sheet woven at 16×16 mesh will resist tearing substantially better than a 150 g/m² sheet at 6×6 mesh, because the higher thread count distributes stress across more yarn intersections. [NEED_CITE: tensile and tear behaviour of woven HDPE fabrics under biaxial loading] When the quoted GSM arrives but the mesh count is lighter than agreed, the cover fails at the exact point the load flexes most — along the reinforced hem where eyelet tension concentrates.

Weave Architecture Behind Every Roll

The HDPE woven base is the structural skeleton of every PE tarpaulin we produce. Yarn denier and mesh density together govern how tensile forces travel through the fabric when a loaded truck hits a crosswind or when a construction cover spans a wide scaffold frame. Our 6×6 through 16×16 density range lets buyers select the right balance between weight and mechanical resistance for their specific PE Tarpaulin custom requirement.

Coating Consistency Across the Full Sheet Width

LDPE coating applied to both faces seals the woven base against water ingress and protects the yarn from UV degradation. Uniform coating weight across the full roll width is where production discipline matters — an uneven coat shows up as stiffness variation between panels and weak points at the thinnest zones. Our three full production lines maintain dedicated QA on coating adhesion at every stage. [NEED_CITE: coating adhesion test methods for laminated PE fabrics per ISO standards]

Decoding the Specification Sheet for Buyers

Mesh density directly controls how the fabric handles point loads. A 6×6 weave at lower GSM serves as a lightweight dust and weather barrier, while a 14×14 or 16×16 weave at higher GSM provides the tear resistance that truck covers and construction wraps demand at tie-down and fold points. The LDPE coating weight must be balanced: too heavy a coat on a low-density base creates a stiff panel that cracks at crease lines, while too light a coat on a dense base leaves the yarns exposed to abrasion. Understanding this interaction helps buyers select the right grade instead of defaulting to the heaviest option available. Edge finishing with PP rope in the hem and plastic triangle reinforcement at every corner redirects stress away from the eyelet holes, which is where PE tarpaulin field failures most commonly originate. Rustproof aluminium eyelets spaced at 1 m or 1.5 m intervals distribute tie-down tension evenly, preventing localised pull-through on the coated surface.

The Hidden Cost of Specifying Without Verification

When colour varies between rolls in the same PE Tarpaulin custom order, the mismatch becomes visible the moment two panels hang side by side on a truck or a construction hoarding. Eyelets placed at inconsistent spacing cause uneven load distribution, and the first tear always appears at the most heavily loaded point. A cover that arrives lighter than the quoted GSM will abrade through at contact points months earlier than expected, generating warranty claims and replacement costs that erase any initial savings on unit price. [NEED_CITE: typical field failure modes of woven PE covers under transport and outdoor exposure] Batch inconsistency is not a cosmetic issue — it signals variation in coating weight, mesh density, or yarn denier that compromises structural performance across the entire delivery.

Why Source PE Tarpaulin from Jinan Jinxiang

Nearly 30 years of focused coated-fabric production gives us deep process control over coating weight and adhesion that translates directly into consistent GSM delivery on every order. Three full production lines with 36 sets of professional equipment support bulk volume with reliable on-time dispatch, so your container ships on schedule. Our 10-person R&D team handles material selection, pattern printing, custom sizing and sample development, producing samples within days for your approval before bulk production begins. Dedicated QA and QC at every production stage with 100 % pre-shipment inspection means the GSM, colour and eyelet spacing you ordered is the specification that arrives. We supply complete documentation packages — material specification sheet, pre-shipment inspection record, roll packing list and certificate of origin — so customs clearance proceeds without delay.

Documentation & Verification

• Material specification sheet confirming exact GSM, mesh density and coating type per order line
• Pre-shipment inspection record with 100 % check on weight, colour and dimensions before dispatch
• UV and fire resistant test reports supplied where applicable to the confirmed grade
• Roll packing list and certificate of origin for smooth customs clearance
• Sample approval record for custom colour, print and sizing sign-off before production

Fabrication, Handling & Storage

• Heat-seal LDPE-coated edges at moderate temperature to avoid melting the HDPE base yarn
• Space rustproof aluminium eyelets at 1 m intervals for heavy-duty truck covers to spread tie-down load
• Store 100 m rolls horizontally on pallets to prevent permanent crease marks on the coating
• Cut sheets with sharp blades to avoid fraying the 6×6 to 16×16 HDPE woven base fabric
• Avoid folding finished sheets at the same line repeatedly to protect the PP rope hem structure

What to Include in Your Enquiry

Provide your target application and exposure conditions — whether the PE Tarpaulin custom order is for truck covers, construction wraps or distribution re-sale — along with the specific sheet or roll dimensions you require. Confirm your colour reference, any logo or branding print, and the eyelet spacing that matches your tie-down hardware. Let us know your market’s fire resistance or UV protection requirements so we can recommend the appropriate treatment grade and supply the supporting test documentation.

Frequently Asked Questions

Q: How is GSM verified on arrival against the quotation value?
A: Every roll and sheet undergoes 100 % pre-shipment inspection where coating weight and total GSM are measured and recorded before dispatch. The pre-shipment inspection record accompanies your shipment, providing documented verification that the delivered material matches the quoted specification. This eliminates the common problem of receiving PE tarpaulin that is lighter than agreed.

Q: How do you control colour consistency across rolls in the same order?
A: We maintain strict pigment dosing control during the LDPE coating stage and conduct visual and instrumental colour checks between production batches. A sample approval step is completed before bulk production begins, ensuring the confirmed shade is replicated across every roll in your PE Tarpaulin custom order without visible variation when installed side by side.

Q: What eyelet spacing, hem reinforcement and corner options are available?
A: Standard options include rustproof aluminium eyelets spaced at 1 m or 1.5 m intervals, PP rope inserted in the hem for edge strength, and black plastic triangle reinforcement at every corner. Custom spacing and alternative reinforcement methods are available to match your specific tie-down hardware and load requirements.

Q: What are the MOQ and lead time for custom width, colour or print?
A: Minimum order quantities and lead times depend on the specific customisation scope — colour matching, width, print artwork and treatment grade all factor into production scheduling. We provide a confirmed lead time and minimum at the quotation stage, and develop samples within days so you can approve the specification before bulk production commits.

Q: Do you supply test reports for UV and fire-resistant claims?
A: Where fire resistant or UV protection treatment is specified and confirmed for your order, we supply the corresponding test documentation with the shipment package. The applicable test basis is stated on the material specification sheet so your site compliance team can verify that the grade delivered meets local regulatory requirements.