PE Tarpaulin 160gms Organic Coated Waterproof – Custom Made

Description

Process-Controlled Coating Expertise — Nearly three decades of coated fabric production with dedicated QA at every stage, ensuring roll-to-roll consistency verified before dispatch.

Technical Specifications

Application Suitability

Why Stated GSM Does Not Guarantee Real-World PE Tarpaulin Performance

The weight on the quotation only matters if it is verified roll by roll before the material leaves the factory.

Many PE tarpaulin buyers have experienced the gap between a quoted 160 g/m² specification and a roll that arrives noticeably lighter on the scale. [NEED_CITE: discrepancy between quoted and actual GSM in imported tarpaulin shipments] When the base fabric mesh count drops or the LDPE coating layer is applied thinner than agreed, the tensile and tear behaviour changes on the loading dock, not on paper. For a PE tarpaulin manufacturer committed to specification accuracy, every roll must carry a weight record tied to its production batch, not just a catalogue number.

HDPE Woven Base with Dual-Side LDPE Coating

The structural integrity of this PE tarpaulin comes from the HDPE woven base fabric, which provides the tensile skeleton that carries tie-down and wind loads. The LDPE coating applied to both sides locks the weave in place, preventing yarn displacement under flexing and sealing the fabric against water penetration. This dual-side coating approach means the tarpaulin performs identically regardless of which face is exposed, a practical advantage for site covers that get flipped or repositioned during a project.

Custom Colour, Print and Reinforcement for Branded Fleet Covers

Colour matching across multiple rolls within the same shipment is a common failure point for distributors and fleet operators. [NEED_CITE: batch-to-batch colour variation in polyethylene tarpaulin production] This PE tarpaulin range supports custom colour specification alongside logo and company information printing directly onto the coated surface. Reinforced strips can be added at high-stress zones before the eyelet and hem finishing stage, giving transport operators the option to strengthen tie-down rows without adding a separate patching layer after delivery.

Mesh Density and Coating Weight: How They Work Together

The mesh count — available from 6×6 through 16×16 — defines how many HDPE yarns cross per unit area in each direction. A denser weave distributes puncture and tear forces across more yarn intersections, reducing the chance that a single cut propagates across the panel. However, mesh density alone does not determine the final gsm; the LDPE coating weight on both sides adds substantially to the total. A 14×14 mesh with a heavy coat can weigh the same as a 16×16 mesh with a lighter coat, yet the two will behave differently under stress — the tighter weave resists tear spread while the heavier coat resists surface abrasion. Specifying both mesh count and target GSM together, rather than one in isolation, ensures the PE tarpaulin manufacturer selects the right base fabric and coating combination for the actual exposure conditions.

The Hidden Cost of Specifying on Weight Alone

When a buyer selects PE tarpaulin based solely on a quoted GSM figure, without verifying the underlying mesh count or coating distribution, the material may pass a weight check on arrival yet still underperform in the field. [NEED_CITE: premature tarpaulin failure linked to low mesh density despite correct GSM] A lightweight base fabric buried under a thick LDPE coat will feel heavy in hand but tear easily at the eyelet under tie-down tension. Conversely, an underweight coat on a dense weave leaves the yarns exposed to UV degradation and water wicking through the weave gaps. The cost of replacing failed covers on a construction site or a fleet of trailers far exceeds the effort of requesting a mesh count and coating breakdown before placing the order.

Why Source This PE Tarpaulin from Jinan Jinxiang

Three full production lines and 36 sets of professional equipment allow bulk roll output without compromising the coating consistency that distributors depend on. A dedicated 10-person R&D team handles custom colour matching, print layout and sample development within days, so buyers can verify appearance and finish before committing to a container load. Every production stage carries in-process QA, with 100% pre-shipment inspection ensuring that the roll count, colour and weight records match the order specification. The facility maintains ISO and CE certification, and documentation packages are assembled per shipment to support import customs and buyer verification at destination.

Documentation & Verification

• Material specification sheet stating GSM, mesh count, coating type and colour reference per order
• 100% pre-shipment inspection record with roll-by-roll packing list
• Test reports for UV protection and fire-resistant grades supplied where applicable
• Certificate of origin and customs documentation included with each dispatch
• Sample approval record retained against the production batch for traceability

Fabrication, Handling & Storage

• Heat-weld seams at moderate temperature; LDPE coat fuses readily but excessive heat distorts the HDPE base weave
• Space rustproof aluminum eyelets at intervals matching your tie-down pattern to distribute load evenly across the PP rope hem
• Store rolls upright on a flat surface to prevent permanent creasing in the LDPE coating layer
• Avoid dragging cut sheets across abrasive ground; the dual-side coat protects against water but not sustained friction
• Clean with mild detergent and water; solvent-based cleaners may soften the LDPE surface and affect printed logos
• Allow folded sheets to acclimatise in cold weather before unfolding to prevent cracking at fold lines

Requesting a Specification That Matches Your Application

To ensure the PE tarpaulin you receive performs as required, share the intended application and the specific exposure conditions — outdoor duration, chemical contact, wind load or abrasion risk. Confirm whether you need roll stock for your own fabrication or cut-to-size sheets with finished hems and eyelets. If your market requires fire-resistant or UV-stabilised grades, specify the test standard or compliance framework so the correct treatment level is applied and documented.

Frequently Asked Questions

Q: How is the GSM on the quotation verified when my PE tarpaulin rolls arrive?
A: Each roll is weighed and inspected before dispatch as part of 100% pre-shipment inspection. A roll packing list accompanies the shipment showing the actual weight and mesh count per roll, allowing you to cross-check against the quoted specification on arrival without relying solely on catalogue descriptions.

Q: Can you guarantee colour consistency across multiple rolls in the same PE tarpaulin order?
A: Colour matching is controlled through the R&D team’s formulation process with sample approval before bulk production. Rolls within the same production batch are inspected side by side during the pre-shipment check to confirm visual consistency before they are packed for dispatch.

Q: What test documentation comes with fire-resistant or UV-treated PE tarpaulin?
A: Where fire-resistant or UV protection treatment is specified, the corresponding test report is included in the documentation package with your shipment. Confirm the grade or test standard required for your market at the inquiry stage so the correct treatment is applied and verified.

Q: What hem and eyelet options can I specify for cut-to-size PE tarpaulin sheets?
A: All sheets include PP rope hemming and black plastic triangle corner reinforcement as standard. Eyelet spacing can be set at 1 m, 1.5 m or a custom interval to match your tie-down hardware pattern. Reinforced strips can also be added at high-stress zones during fabrication.

Q: What is the minimum order for custom colour, width or printed branding on PE tarpaulin?
A: Minimum quantities depend on the specific customisation — colour, width, print layout or a combination. Share your requirements at the inquiry stage and the team will confirm the minimum alongside lead time and provide a sample for approval before bulk production begins.